In the interest of safety,the JDO switch should be installed by an electrically competent person (e.g. a qualified electrician).

Switch off circuit breaker in distribution board before installation or changing address setting. Failure to observe this may result in electric shock and damage to the switch.

Before attempting to change lamp or service the light fitting,pull down the fuse drawer (located at lower edge of switch) to isolate circuit completely.

This switch is strictly for indoor use only. Do not clean the faceplate with a wet cloth. USE a dry brush to clean off dirt.

---

Copyright 2001 JDO Labs Pte. Ltd.
Designed & Developed by JDO Labs Pte.Ltd